Expedite your inspection requests and get the answers you need by taking advantage of our Interactive Voice Messaging to schedule an inspection or to call for results of an electrical inspection.

Use this system to:

  • Canceling a request;

  • Obtain faxed copies of the results;

  • Find information about dates and times the inspections were complete.

You will be asked which option to choose to obtain the information which you are inquiring and can also request to talk to a Utility Service Representative or leave a message for an inspector.

Schedule an Inspection

  1. Have your permit number or address of inspection ready

  2. Call (253) 502-8277.

  3. Enter the permit number or address when requested by the recording.

  4. To Schedule an inspection you will be prompted through your request for either a residential or commercial installation.

Residential inspections

You will be asked to press a three digit code:

#010 for Ditch
#020 for Rough-in
#030 for Backfill
#060 for Service
#140 for Low Voltage
#160 for Reinspection
#110 for Final

0# for Utility Service Representative, and when prompted, 0# again

Commercial inspections

You will be asked to press a three digit code:

#010 for Ditch
#030 for Backfill
#040 for Wall Cover
#050 for Ceiling
#060 for Service
#080 for Slab
#140 for Low Voltage
#160 for Reinspection
#110 for Final

0#for Utility Service Representative, and when prompted, 0# again

Get Inspection Results

You will be prompted to press #3. Listen to the entire message and the message will give you the results of the inspection performed.